CAFCO® Mesh Retaining Anchors

ADVANTAGES

  • Shelf life : no limit

Mesh retaining anchors

CAFCO® Mesh Retaining Anchor is a tested assembled item used to install CAFCO® Profiled Stainless Steel Mesh or CAFCO® Plastic Coated Galvanised Mesh for use with the Cafco FENDOLITE® MII system.

CAFCO® Mesh Retaining Anchor features a unique shouldered design to self align the anchor and mesh in order to avoid the mesh being pinched or cut during installation.

The anchors can be installed manually as shown below or in conjunction with an automatic feed system.

Applications

  • item used to install meshs
Properties and Performances
< #Back#

PROPERTIES & PERFORMANCES

Dimensions and materials Stainless steel 22.5mm with a 22mm leg

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

PROPERTIES & PERFORMANCES

Dimensions and materials Stainless steel 22.5mm with a 22mm leg

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

Installation
< #Back#

INSTALLATION

Typical substrates Concrete or blockwork
Methods CAFCO® Mesh Retaining Anchor is easily installed by placing the anchor in a drilled or precast 8mm hole of a minimum depth of 24mm and using a 4mm setting pin.
This is used to displace the internal captive plug by up to 3mm, which will produce a pull out load in excess of 1.2KN in most concretes with consistent failure in base material.
Supported by UKAS testing of pull out resistance in accordance with BS 1881-207: 1992.

 

Before installation

Mesh Retaining anchor technical detail

After installation

Mesh Retaining anchor technical detail

INSTALLATION

Typical substrates Concrete or blockwork
Methods CAFCO® Mesh Retaining Anchor is easily installed by placing the anchor in a drilled or precast 8mm hole of a minimum depth of 24mm and using a 4mm setting pin.
This is used to displace the internal captive plug by up to 3mm, which will produce a pull out load in excess of 1.2KN in most concretes with consistent failure in base material.
Supported by UKAS testing of pull out resistance in accordance with BS 1881-207: 1992.

 

Before installation

Mesh Retaining anchor technical detail

After installation

Mesh Retaining anchor technical detail

Additional data
< #Back#

PAKAGING

Boxes of 1,200.

STORAGE

Off the ground and kept dry until ready for use.

SHELF LIFE

No limit.

PAKAGING

Boxes of 1,200.

STORAGE

Off the ground and kept dry until ready for use.

SHELF LIFE

No limit.

Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

health and safety
< #Back#

HEALTH & SAFETY

The use of eye protection and gloves is recommended. In addition, appropriate face masks should be used during any drilling operations.

Size and shape of the product would generally preclude ingestion. Medical attention should be sought in the event of parts being swallowed.

Normal hygiene precautions should be followed by wash- ing hands before handling or eating food.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.

HEALTH & SAFETY

The use of eye protection and gloves is recommended. In addition, appropriate face masks should be used during any drilling operations.

Size and shape of the product would generally preclude ingestion. Medical attention should be sought in the event of parts being swallowed.

Normal hygiene precautions should be followed by wash- ing hands before handling or eating food.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.

Documents
< #Back#

Product Data Sheets

Europe & Asia Pacifics

Europe & Asia Pacifics

Product Data Sheets

Europe & Asia Pacifics

Europe & Asia Pacifics