Promat®-Aqualite

Advantages

Fast setting.

Promat®-Aqualite is a fast setting, fast curing, rapid strength gain dry spray concrete. Promat®-Aqualite is a blend of cement, potable water, approved cement binders and specially selected aggregates that is resistant to chloride penetration. When used as an impervious basecoat with PROMASPRAY®-F5, the Portland cement based system will prevent any water ingress through the secondary fire resistant tunnel lining. Promat®-Aqualite is used for horizontal and vertical applications in tunnels where high early strength is required and wherever water ingress, pollution or chemical attack is likely.

Properties & Performance
Formats & logistic
Processing

Properties and Performance

< #Back#

Density	2500kg/m³
Full Cure	By hydraulic set
Initial Set	4hours
Number Of Coat	One
Theoretical Coverage	1m²/bag 25kg at 10mm thick

Density	2500kg/m³
Full Cure	By hydraulic set
Initial Set	4hours
Number Of Coat	One
Theoretical Coverage	1m²/bag 25kg at 10mm thick

< #Back#

Packaging

25kg in polythene bag.

Shelf Life

6 months when stored as directed.

Storage

Store in dry conditions.

Packaging

25kg in polythene bag.

Shelf Life

6 months when stored as directed.

Storage

Store in dry conditions.

< #Back#

Application General	Promat®-Aqualite should be applied to a minimum thickness of 10mm proud of lath or concrete.
Substrates Preparation	The substrate shall be clean and free from dust. Concrete surfaces should have surface laitence removed by Ultra High Pressure (UHP) jet washing to expose aggregate for correct adhesion.
Application Mixing	For optimum results, conventional dry spray machines should be used. The optimum water/cement ratio is 38%. Higher ratios will result in reduced strength and longer setting times. Promat®-Aqualite should be placed in the dry spray machine and transported to the nozzle by dry air where water is added. Set times may be adjusted in hot or cold weather by adding cold or hot water respectively.
Application Setting Time	Promat®-Aqualite is designed to set within 10 minutes at 20°C. Set time can be adjusted by using hot or cold water.

Application General	Promat®-Aqualite should be applied to a minimum thickness of 10mm proud of lath or concrete.
Substrates Preparation	The substrate shall be clean and free from dust. Concrete surfaces should have surface laitence removed by Ultra High Pressure (UHP) jet washing to expose aggregate for correct adhesion.
Application Mixing	For optimum results, conventional dry spray machines should be used. The optimum water/cement ratio is 38%. Higher ratios will result in reduced strength and longer setting times. Promat®-Aqualite should be placed in the dry spray machine and transported to the nozzle by dry air where water is added. Set times may be adjusted in hot or cold weather by adding cold or hot water respectively.
Application Setting Time	Promat®-Aqualite is designed to set within 10 minutes at 20°C. Set time can be adjusted by using hot or cold water.