PROMATECT®-H

Advantages

{fields: promat_Pro_CommercialName} is a trowel applied, factory controlled premix based on vermiculite and Portland cement. It is used with potable water to be added on site. {fields: promat_Pro_CommercialName} will not fail suddenly after the prescribed fire resistance period but will continue to offer a predictable level of fire protection (insulation) for the duration of the fire. {fields: promat_Pro_CommercialName} is ideal for application by trowel in interior and fully exposed environments.

PROMATECT®-H is a non-combustible matrix engineered mineral board reinforced with selected fibres and fillers. It is formulated without organic fibres and does not contain formaldehyde. PROMATECT®-H is off-white in colour and has a smooth finish on one face with a sanded reverse face. The board can be left plain or can be easily finished with paints. PROMATECT®-H is resistant to the effects of moisture and will not physically deteriorate when used in damp or humid conditions. Performance characteristics are not degraded by age.

Properties and Performance

< #Back#
Alkalinity

12pH (approximate)

Bending Strength Longitudinal

7.6N/mm²

Classification Temperature

400°C

Cold Compressive Strength

9.3N/mm²

Nominal Dry Density

870kg/m³

Moisture Content

5% - 10% (at EMC*)

Moisture Diffusion Resistance

ca. 20μ

Finishing Front face: smooth, unsanded - Back face: textured and or sanded - Colour: beige - white
Tensile Strength Longitudinal

4.8N/mm²

Thermal Conductivity @ 20 °C

0.175W/m°K

Water Absorbency

0.5g/cm³

Water Damp Diffusion Resistance

20

Alkalinity

12pH (approximate)

Bending Strength Longitudinal

7.6N/mm²

Classification Temperature

400°C

Cold Compressive Strength

9.3N/mm²

Nominal Dry Density

870kg/m³

Moisture Content

5% - 10% (at EMC*)

Moisture Diffusion Resistance

ca. 20μ

Finishing Front face: smooth, unsanded - Back face: textured and or sanded - Colour: beige - white
Tensile Strength Longitudinal

4.8N/mm²

Thermal Conductivity @ 20 °C

0.175W/m°K

Water Absorbency

0.5g/cm³

Water Damp Diffusion Resistance

20

EMC = Equilibrium moisture content

< #Back#

PROMATECT®-H - Dimensions, Tolerances and Weights

Thickness (mm)

Tolerance on thickness (mm)

Length x Width (mm)

Tolerance on length and width (mm)

Dry weight (kg/m²)

Weight (kg/m²) at 20°C, 65% RH

6

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.5.4

ca.5.7

8

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.7.2

ca.7.6

10

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.9.0

ca.9.5

12

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.10.8

ca.11.5

15

± 1.0

1250 x 2500 ; 1250 x 3000

± 0.3

ca.13.1

ca.13.9

20

± 1.0

1250 x 2500 ; 1250 x 3000

± 0.3

ca.17.4

ca.18.5

25

± 1.5

1250 x 2500 ; 1250 x 3000

± 0.3

 ca.21.8

ca.23.1

PROMATECT®-H - Dimensions, Tolerances and Weights

Thickness (mm)

Tolerance on thickness (mm)

Length x Width (mm)

Tolerance on length and width (mm)

Dry weight (kg/m²)

Weight (kg/m²) at 20°C, 65% RH

6

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.5.4

ca.5.7

8

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.7.2

ca.7.6

10

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.9.0

ca.9.5

12

± 0.5

1250 x 2500 ; 1250 x 3000

± 0.3

ca.10.8

ca.11.5

15

± 1.0

1250 x 2500 ; 1250 x 3000

± 0.3

ca.13.1

ca.13.9

20

± 1.0

1250 x 2500 ; 1250 x 3000

± 0.3

ca.17.4

ca.18.5

25

± 1.5

1250 x 2500 ; 1250 x 3000

± 0.3

 ca.21.8

ca.23.1

< #Back#

Storage

Store on flat surface, in a dry area.

Storage

Store on flat surface, in a dry area.

< #Back#
Processing When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.
Waste Disposal Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.
Processing When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.
Waste Disposal Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

< #Back#

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.