PROMATECT®-T

Advantages

  • Easy to install, the application of PROMATECT®-T can be achieved on existing tunnels without total elimination of the traffic.
  • The engineered matrix of PROMATECT®-T allows for reduced fire protection thicknesses (by up to 50%) for equivalent concrete interface temperatures.

PROMATECT®-T is part of a new generation of high performance board products with multiple advantages for the protection of concrete structures and the protection of escape routes, fire doors, cable systems and ventilation systems. Designed to provide protection solutions for use within the most severe of fire scenarios; as defined by the RWS fire curve; PROMATECT®-T provides not just a barrier to the passage of fire, but in a way that ensures the substrate being protected is kept cool in a controlled manner. Simple and easy to install, PROMATECT®-T can be applied within existing tunnels without the need to completely close off all traffic lanes. The engineered matrix of PROMATECT®-T provides a superior performance that allows for a reduction in the required fire protection thickness for equivalent concrete interface temperatures to much thicker competitor products and systems.

Applications

  • Structural protection
  • Direct installation to the lining
  • Installation on a substructure)
  • Lost formwork
  • Cable enclosures
  • Finishes for escape routes

Properties and Performance

< #Back#
Alkalinity

10pH (approximate)

Bending Strength Longitudinal

4.5N/mm²

Bolt Pull Through Resistance Bolt M8, washer 30 mm thichn. board=25 mm 3.220
Coefficient of Expansion

8 x 10-6 m/m°K (100 to 20°C)

Compressive Strength

1.2N/mm² (perpendicular to the surface - 1% deformation)

(perpendicular to the surface - 10% deformation)

Nominal Dry Density

900kg/m³

Moisture Content

0.05% (at EMC*)

Moisture Diffusion Resistance

Moisture Movement

0.84mm/m (ambiant to saturated)

Screw Pull Out Resistance Edge quick fix screw - 5.0 x 50 20 mm deep airdry: 657
Screw Pull Out Resistance Surface quick fix screw - 5.0 x 50 20 mm deep saturated: 372
Finishing Front face: smooth, sanded - Back face: lightly honeycombed textured - Colour: greyish white
Tensile Strength Longitudinal

1.2N/mm²

Thermal Conductivity @ 20 °C

ca. 0.212W/m°K (ASTM C518-75)

Thermal Shrinkage

1.7% (3 hrs 950°C)

Thermal Shrinkage 2

4% (3 hrs 1250°C)

Water Absorbency

0.6g/cm³

Alkalinity

10pH (approximate)

Bending Strength Longitudinal

4.5N/mm²

Bolt Pull Through Resistance Bolt M8, washer 30 mm thichn. board=25 mm 3.220
Coefficient of Expansion

8 x 10-6 m/m°K (100 to 20°C)

Compressive Strength

1.2N/mm² (perpendicular to the surface - 1% deformation)

(perpendicular to the surface - 10% deformation)

Nominal Dry Density

900kg/m³

Moisture Content

0.05% (at EMC*)

Moisture Diffusion Resistance

Moisture Movement

0.84mm/m (ambiant to saturated)

Screw Pull Out Resistance Edge quick fix screw - 5.0 x 50 20 mm deep airdry: 657
Screw Pull Out Resistance Surface quick fix screw - 5.0 x 50 20 mm deep saturated: 372
Finishing Front face: smooth, sanded - Back face: lightly honeycombed textured - Colour: greyish white
Tensile Strength Longitudinal

1.2N/mm²

Thermal Conductivity @ 20 °C

ca. 0.212W/m°K (ASTM C518-75)

Thermal Shrinkage

1.7% (3 hrs 950°C)

Thermal Shrinkage 2

4% (3 hrs 1250°C)

Water Absorbency

0.6g/cm³

EMC = Equilibrium moisture content

< #Back#

PROMATECT®-T - Dimensions, Tolerances and Weights

Thickness (mm)

Tolerance on thickness (mm)

Length x Width (mm)

Tolerance on length and width

Dry weight (Kg/m²)

Weight (Kg/m²) at 20°C, 65% RH

15

± 0.5

1200 x 2500

± 0.5

ca.14.8

ca.15.6

20

± 0.5

1200 x 2500

± 0.5

ca.19.8

ca.20.8

25

± 0.5

1200 x 2500

± 0.5

ca.24.7

ca.25.9

30

± 0.5

1200 x 2500

± 0.5

ca.29.7

ca.31.2

35

± 0.5

1200 x 2500

± 0.5

ca.34.6

ca.36.4

40

± 0.5

1200 x 2500

± 0.5

ca.39.6

ca.41.6

PROMATECT®-T - Dimensions, Tolerances and Weights

Thickness (mm)

Tolerance on thickness (mm)

Length x Width (mm)

Tolerance on length and width

Dry weight (Kg/m²)

Weight (Kg/m²) at 20°C, 65% RH

15

± 0.5

1200 x 2500

± 0.5

ca.14.8

ca.15.6

20

± 0.5

1200 x 2500

± 0.5

ca.19.8

ca.20.8

25

± 0.5

1200 x 2500

± 0.5

ca.24.7

ca.25.9

30

± 0.5

1200 x 2500

± 0.5

ca.29.7

ca.31.2

35

± 0.5

1200 x 2500

± 0.5

ca.34.6

ca.36.4

40

± 0.5

1200 x 2500

± 0.5

ca.39.6

ca.41.6

< #Back#

Storage

Store on flat surface, in a dry area.

Storage

Store on flat surface, in a dry area.

< #Back#
Processing & Machining

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.

Waste Disposal

Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste. If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

Processing & Machining

When machining the product with power tools, do not breathe dust and respect the regulatory occupational exposure limits for total inhalable and respirable dust. Wear safety goggles. Avoid contact with skin and eyes. Use dust extraction. In case of insufficient ventilation, wear suitable respiratory equipment to avoid health effects.

Waste Disposal

Refer to local legislation If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste. If not available: The board is not classified as a dangerous substance and no special provisions are required regarding the carriage and disposal of the product to landfill. They can placed in an on-site skip with other general building waste.

< #Back#

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Quality Assurance

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards. The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.